Showing 49–88 of 88 results
For Pickup variants, except as noted
* Applicable to Tray Body with Trundle Drawers variants
Must be installed with an Alloy or Steel Bullbar.
Not compatible with leather seats
Not compatible with leather seats
Can only be fitted with accessory Side Steps AND Steel Bull Bar
Double Cab & Extra Cab – 4×4 and Hi-Rider only. Compatible with side rail PZQ4389020. Requires removal of OE sidestep/rock rails
Not compatible with Over Rail Ute Liner
If fitting winch, must install Winch cradle (PZQ9389030) and winch fitting kit (PZQ298921X)
Max. limits for antenna installation-
Base OD: 42mm; Mass: 1.4kg, Height: 1.2m (RH) or 0.73m (LH).
Do not fit in inboard area (TSS zone)
If fitting winch, must install Winch cradle (PZQ9389030) and winch fitting kit (PZQ298921X)
Max. limits for antenna installation-
Base OD: 42mm; Mass: 1.4kg, Height: 1.2m (RH) or 0.73m (LH).
Do not fit in inboard area (TSS zone)
Required when fitting Front Recovery Points to accessory Steel Bull Bar
Images are for display purposes only and may differ from actual product.
*Suits Single Cab variants fitted with Narrow GPA Tray Body (2400mm)
If tub-delete conversion/tray body is fitted to pick up variants, use long tongue towbar instead (PZQ6489173).
Towbar design maximum capacity – 3500kg. Refer to vehicle Owner’s Manual for vehicle specific towing capacities.
Suits vehicles fitted with battery terminal and fuse box kit.
Images are for display purposes only and may differ from actual product.
Suits vehicles fitted with battery terminal and fuse box kit
Suits vehicles fitted with battery terminal and fuse box kit
Must order with additional parts highlighted in below.
Not compatible with Auxillary Power Socket Kit, J-Deck STC, Utility Boxes and Bed Slide. Compatible with J-Deck HTC and J-Deck Canopy. Fit Integration Kit (PZQ7089J60) if fitting with canopy.
Order additional protective tape kit: PZQ70FFPAD
Double Cab.
Not compatible with Wide Body variants when fitted with a Tray.
Not applicable to cab chassis variants – mirror extensions
Required when ordering Alloy Wheel 17in (Black) PC4570K012.
Not compatible with standard OE wheels.
Required when ordering Alloy Wheel 17in (Silver) PC4570K013.
Not compatible with standard OE wheels.
Winch Spring Kit required. Fitment to steel bull bars require winch cradle PZQ9389030 and steel winch fitting kit PZQ298921X.
Winch Spring Kit required (excludes Rugged X). Fitment to steel bull bars require winch cradle PZQ9389030 and steel winch fitting kit PZQ298921X.
Not required on alloy bullbars. If fitted to steel bullbar, requires PZQ298921X or PZQ2989475 depending on bullbar. Check applicability below.
Images are for display purposes only and may differ from actual product.
Caution: Must not be used without winch installed. Suits 4×2 Hi-Rider variants.
Required for LED Light Bar (PZQ5989160, *170) for vehicles with Fuse Box Kit.
Must be ordered with alloy bullbar (SR and Workmate grades)
Showing 49–88 of 88 results